IPMC-111PB++-60W is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB++-60W supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB++-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard 4-pair cable in an Ethernet network. Each IPMC-111PB++-60W has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB++-60W with wide operating temperature range from -40 ~ 75℃ and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. IPMC-111PB++-60W also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB++-60W will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB++-60W is reliable media converter with PoE capability and can satisfy most demand of operating environment. |