Specification
 Specifications |
| ORing Injector Model | INJ-101GT++-60W |
| Physical Ports | |
| RJ-45 Ethernet Port Input | 1 |
| RJ-45 Ethernet Port with P.S.E. Output | 1 |
| Operating Voltage | |
| Input Voltage | 50 ~ 57 VDC on 4-pin terminal block |
| LED Indicators | |
| Power Indicator | PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally. |
| PoE Indicators | 1 x LED
Blue On: PoE Device Link
Off : None PoE Device Detected
Blink (Blue) : Overload present |
| DIP Switch | |
| DIP Switch 1/2 | DIP Switch 1/2 (OFF): PoE P.S.E set to master and Asyncronize mode DIP Switch 1/2 (ON) : PoE P.S.E set to syncronize mode(default) |
| Power | |
| Input Power | 50 ~ 57 VDC on 4-pin terminal block |
| Power Consumption | 1 Watts (Not include PD's device) |
| PoE Power Budget | 60 Watts max |
| Protection | |
| Short Circuit Protection | Present |
| Over Load Protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 26.1(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch) |
| Weight (g) | 188 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMC | EN55032, EN55024(CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3 |
| EMI | CISPR 32, EN55032, FCC Part 15B class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | 5 years |
*Note1: (1) By default, the output value of the high power PoE++ is in Sync mode which supports PoE af/at-compliant P.D. devices.
(2) If you cannot enable the 60W PTZ camera, please set the DIP switch to Async mode and reconnect power. This mode only supports Dual P.D mode. You may not connect to an af/at-compliant P.D. device with this mode.